ST Suspensions has presented a range of ST spring sets for the latest Audi A3 and the BMW 2-Series Coupe. Through their sporty spring rate, ST springs enhance the driving dynamic and are made from a chrome-silicon steel alloy.

The cars equipped with ST springs respond more precisely to steering inputs and the drivers benefit from sportier handling characteristics. The different sets of sport springs allow a lowering between 20 and 40 mm on each axle. Like all ST suspensions components, also these ST spring kits include a German TÜV certificate. The pricing is available upon request.

2014 BMW 2-Series Coupe M235i comes with a 3.0-liter TwinPower Turbo inline six-cylinder engine – 326HP (240 kW) and 450Nm (322 lb-ft) 0-100 km/h in 4.8 seconds and a top speed of 250 km/h (155 mph). The engine is connected to an 8-speed ZF automatic gearbox. The fuel consumption is decent 7.6 liters / 100 km on combined cycle. There is no doubt that a set of lowering ST springs will further improve the fun behind the steering wheel of such car.

2014 Audi S3 comes with a 2.0 liter turbocharged four-cylinder engine – 300HP (221 kW) at 5,500RPM and 380Nm (280 lb-ft) of torque at 1,800RPM. 0-100 km/h in 5.0 seconds and a top speed of 250 km/h (155 mph). The engine is connected to a 6-speed manual or a 6-speed S-tronic automatic transmission.

ST Audi A3 and BMW 2-series Coupe (2014) - picture 1 of 10
ST Audi A3 and BMW 2-series Coupe (2014) - picture 2 of 10
ST Audi A3 and BMW 2-series Coupe (2014) - picture 3 of 10
ST Audi A3 and BMW 2-series Coupe (2014) - picture 4 of 10
ST Audi A3 and BMW 2-series Coupe (2014) - picture 5 of 10
ST Audi A3 and BMW 2-series Coupe (2014) - picture 6 of 10
ST Audi A3 and BMW 2-series Coupe (2014) - picture 7 of 10
ST Audi A3 and BMW 2-series Coupe (2014) - picture 8 of 10

Source: ST Suspension