Je Design Seat Leon 1 P FR
After JE DESIGN, a well-known SEAT customising specialist, tuned the new Leon two months prior to its market launch, the same tuning specialist from Leingarten, Germany, has now turned its attention to the "FR" version.
The core of the modifications is the power boost to the 2.0 TDI engine. Instead of 125 kW (170 bhp), it now generates a solid 142 kW (193 bhp) with a torque increase from 85 to 410 Nm. The modifications to the engine management system permit better driving performance: A top speed of 224 km/h (series: 218 km/h) and acceleration from 0 to 100 km/h in 7.6 seconds (series: 8.2) send out a clear message! The power boost comes with a TÜV parts certificate. Needless to say, the TDI still complies with the EI regulations. An electronic power boost for the new 2.0 TFSI with 147 KW / 200 bhp leads to a terrific 180 kW (244 bhp) with a torque boost up to 355 Nm at 1,850 rpm. Here, too, the modifications to the engine management system permit enhanced driving performance: A top speed of 235 km/h (series: 229 km/h) and acceleration from 0 to 100 in 6.5 seconds (series: 7.3)! This power boost also comes with a TÜV parts certificate. In each case, the price includes a 1-year guarantee on the engine, drive train and gearbox. Upon request and subject to an extra charge, this can be extended by a further 12 months. A power boost for the new Leon CUPRA 2.0 TFSI with 176 KW / 240 bhp is in the pipeline.
JE DESIGN starts on a sporty note at the front by fitting a new front grille without a brand logo that features a grille insert. Headlight eyebrows lend this Spaniard a more aggressive look.
A sporty front spoiler featuring an additional air vent in the corners make the Seat Leon look even classier when overtaking. JE DESIGN enhances the side view by fitting a set of side sills. The tuning specialist completes the rear view of this Spaniard by fitting a rear apron. Last but not least, a rear spoiler goes to create greater downforce on the rear axle, particularly at high speeds. These aerodynamic body-styling components are also available as a complete kit. In addition, it is also possible to order the self-adhesive JE-DESIGN roof fin "Shark attack" in a matt black finish.
Upon request, it is also possible to order a 4-pipe stainless steel rear silencer with chrome-plated tailpipes. This not only promises to generate an awesome sound, but also optimises the engine performance by reducing the back pressure.
The growing desire for chrome also leaves its mark on the Leon range from JE DESIGN. Besides a four-piece set of door handle surrounds, the price also includes the B-post trim "3 D Chrome" with a chrome inlay and a rear door surround in addition to the trim panel for the lower section of the boot lid.
Customers can choose from five sets of wheels. The climax of the offering in 17, 18 and 19 inch versions is the "Multispoke" complete set of wheels in chrome look in the dimension 8.0 x 19 ET 45 with size 225/35 R 19 Y tyres.
JE DESIGN also ensures that the Seat Leon remains sure-footed despite its extra power. The suspension range comprises a set of sports suspension struts, which brings the Leon FR around 30mm closer to the ground, and which noticeably improves the handling and ride comfort due to the lower centre of gravity.
Alternatively, the tuning specialist offers sportier handling in the form of a coil-over suspension kit, which changes the road clearance of this fiery Spaniard in the range from 35 to 65 mm. Upon request, constantly-acting deceleration from high speeds is guaranteed by a 4-piston sports braking system (330 x 28 mm) on the front axle.